Hedge Toppers
Add height and privacy to an existing fence from the day it’s installed. Our hedge topper extensions mount above your current fence line, adding 1–3 feet of green screening in most cases, or 4 feet and more without replacing a single post.
- Heights
- 12″ · 24″ · 36″
- Panels
- 40″, interlocking
The short version.
Size it below, check the specifications, or open the Topper Configurator to preview it on your own fence.
- What
- Artificial hedge panels that mount on top of an existing fence
- Adds
- 12″, 24″ or 36″ of height; custom heights for commercial projects
- Panels
- 40″ wide; they interlock for continuous coverage
- Weight
- 2–5 lb per panel, UV-stabilized polyethylene on a galvanized wire frame
- Mounting
- Zip ties and mounting clips; optional post-cap brackets for wood fences
- Check first
- Local fence-height rules and your HOA
How much height do you need?
Set your fence and the topper. The drawing shows what each height adds and how many 40-inch panels cover the run.
Fence type
Topper height
- Height with the topper
- Panels for the run
- × 40″, interlocking
- Mounting
- Zip ties and mounting clips; optional post-cap bracket system for wood fences
Check local fence-height rules and your HOA before adding height. Custom heights are available for commercial projects.
Try the Topper Configurator
Preview how hedge toppers could look on your fence before you buy. Choose your fence type, topper height, and foliage style in our interactive tool.
Why hedge toppers.
Height without rebuilding, on the fence you already have.
Your fence isn’t tall enough.
Many fences -- especially those in residential neighborhoods governed by HOA height restrictions -- stop at 4 or 5 feet. That’s not enough to block sightlines from two-story neighbors, elevated patios, or commercial properties next door.
Building a taller fence often requires permits, new posts, and a full reconstruction. It’s expensive, it’s disruptive, and in many jurisdictions it’s simply not allowed.
Extend without replacing.
Hedge toppers sit on top of your existing fence, adding 12 to 36 inches of dense, green screening. Because they’re lightweight and don’t change the fence structure itself, they may not need a permit and can often work within HOA guidelines. Check local rules first.
The result is added privacy from the day it’s installed, with the look of a trimmed hedge above your fence line. No waiting years for natural hedges to fill in, and upkeep is mostly occasional cleaning.
Height without rebuilding.
Add 12″, 24″, or 36″ of height to an existing fence without rebuilding it. No construction crew and no waiting for natural hedges to grow. Check local fence-height rules before adding height.
Preserves your existing fence.
Mounts on top of a sound existing fence without structural modifications. Works with many chain link, wood, vinyl, wrought iron, and aluminum fences.
HOA-friendly design.
Because hedge toppers are a decorative addition rather than a structural change, some HOAs treat them differently from fence height. Confirm with your HOA before you install.
Year-round privacy.
Unlike natural hedges that can thin out in winter, die from drought, or develop bare spots, artificial hedge toppers keep the same density through every season.
Simple mounting.
Hedge toppers mount panel by panel with the included zip ties and clips. Most installs need only basic tools.
Measure
Measure fence length and height needed
Position
Place topper panel on fence top rail
Secure
Attach with zip ties or brackets
Connect
Interlock panels for continuous coverage
Topper specifications.
- Available Heights
- 12″–4 ft+12″, 24″, and 36″ are the most common heights; 4 ft and taller are also available.
- Panel Width
- 40″Standard 40″ width panels interlock for continuous coverage along the full fence run.
- Material
- UV PEUV-stabilized polyethylene foliage on galvanized wire frame. Service life depends on sun exposure, orientation, and site conditions.
- Weight
- 2–5 lbLightweight enough to mount on most sound fences without reinforcing posts or rails.
- Mount System
- UniversalIncludes zip ties and mounting clips. Optional post-cap bracket system available for wood fences.
- Fire Rating
- OptionalNFPA 701 Method 2 documentation for applicable configurations, for commercial, multi-family and higher-risk projects; your AHJ decides. See fire documentation.
All specifications as a table
| Attribute | Specification |
|---|---|
| Available Heights | 12″, 24″, and 36″ (custom for commercial) |
| Panel Width | 40″ |
| Material | UV-stabilized polyethylene on galvanized wire frame |
| Service Life | Depends on sun exposure, orientation, and site conditions |
| Weight | 2–5 lbs per panel |
| Mount System | Universal — zip ties and mounting clips |
| Fire Rating | NFPA 701 Method 2 documentation for applicable configurations |
Popular applications.
Where toppers go to work. The photos show related hedge projects.
Residential privacy
Block sightlines from two-story neighbors, elevated decks, and overlooking windows. The most popular use case for hedge toppers across our customer base. For maximum height, see our tall artificial privacy hedge panels.
Shown: a 16-foot privacy screen, Austin, TX
The Austin project
Pool & spa enclosures
Add privacy to pool areas where code-minimum fences don’t provide adequate visual screening. Maintain an inviting outdoor aesthetic while blocking views.
Shown: hedge panels around a jacuzzi deck, Brentwood, CA
The Brentwood project
Restaurant patios
Extend patio dividers to create intimate dining sections. The natural hedge look enhances ambiance while providing functional separation from sidewalks and adjacent properties.
Shown: patio hedge barriers, upscale restaurant, Houston, TX
The Houston project
Commercial properties
Screen rooftop equipment, service areas, and parking structures. Hedge toppers on existing security fencing add visual appeal without compromising access or security.
Shown: rooftop AC screen and privacy wall, LA Golf, Los Angeles
The LA Golf projectFrequently asked questions
How much height do hedge toppers add to my fence?
Toppers are most often 12", 24", or 36" tall; 4 ft and taller toppers are also available. Standard 40" width panels interlock for continuous coverage along the full fence run, so you can extend an existing fence without rebuilding it.
Do hedge toppers need reinforced posts?
Usually not. Each panel weighs only 2-5 lbs, making it lightweight enough to mount on most sound fences without reinforcing posts or rails. The foliage is UV-stabilized polyethylene on a galvanized wire frame; service life depends on sun exposure, orientation, and site conditions.
Need installation in California?
California installation for artificial hedges, privacy walls, fence extensions, and artificial living walls is handled by Califauxscapes, the California installation division of Geranium Street USA, Inc.
Installation services are provided by Geranium Street USA, Inc., CSLB #955154.
Add height to your fence.
Send us your fence dimensions and desired height extension. We’ll configure the right topper solution and respond within 48 hours.